Action Clutch Stage 3 (1MS) Clutch Kit is designed to withstand even the most challenging conditions. Featuring a heavy-duty single diaphragm pressure plate, reinforced drive straps, and a Sprung MIBA Ceramic (available in a 4 or 6 puck) disc, this kit provides peak performance and extreme durability for low/mild horsepower vehicles. Our Sprung MIBA Ceramic clutch kit provides quicker engagement and will introduce some clutch chatter, which will minimize after proper break-in. For those looking to take their vehicles to the next level, the Stage 3 (1MS) Action Clutch Kit provides maximum control and power with little compromise on reliability.
At Action Clutch, safety is our priority. Our patented fully enclosed spring retainers prevent engine and transmission damage. Each kit is quality-checked by engineers with over 60 years of experience, ensuring consistent performance and peace of mind.
170% INCREASED HOLDING CAPACITY OVER FACTORY KIT*
HEAVY-DUTY STREET USE AND OCCASIONAL DRAG / ROAD / DRIFT RACING
Specifications:

Product Type Stage 3 Clutch Kit (1MS)
Product Weight (lbs) 15
SFI 1.1
What's Included:
Single Diaphragm HD Pressure Plate
MIBA Ceramic Sprung 6 Puck Clutch Disc
Premium Throwout Bearing
Premium Pilot Bearing
Clutch Alignment Tool
Break-in Requirements:
500 street miles / Keep RPM's under 4500, no more than half-throttle, no boost (if applicable).
Proper break-in is required in order to retain product warranty, ensure longevity and holding capacity.
*Increase in holding capacity is rated in Crank Torque, not Wheel Torque
SFI Spec 1.1 Replacement Flywheels and Clutch Assemblies
Vehicle Application:
Fits for Honda Fit LX, EX, Sport 2009 - 2014 (1.5L SOHC 4cyl; 5-speed; GE)
Fits for Honda Fit LX, EX, Sport 2015 - 2020 (1.5L DOHC i-VTEC 4cyl; 6-speed; GK)
Note: Replaces the factory 190mm clutch with a larger 200mm clutch, increasing torque capacity and extending clutch life by 50%.