مميزات خاصة

Avoid Accidental Movement: With our car roof rack hardware, no more worry about accidental movement or shaking of the roof box, the U-bolt structure provides a good tightening force, which can keep the roof box stable even under complicated road conditions
Compatible Size: In order for the car roof rack clamps kit to fit correctly on your vehicle, please check the roof rack crossbar size before purchase, the width needs to be less than 3.35 inch (85 mm) and the thickness needs to be less than 1.06 inch (27 mm)
Accessories List: Sufficient accessories, car roof rack mounting brackets kit includes U-bolts*4 (3.92" spacing between the outside of the two sides of the studs), straps*2, nuts*8, sealing stickers*1 sheet, washers*4, instructions*1, plate*4, equipped with spacers can protect the contact surface
Sturdy & Durable: The U-bolts in the car roof rack brackets kits adopt galvanized iron as the material, which has good anti-fatigue ability and can keep the structure intact in different environments, and will not be easy to break during fixing, and the ABS parts are weather-resistant
Using Steps: First put the plate to the corresponding position of the vehicle luggage rack, put the provided gasket under the plate, take out the U-bolts so that the studs on both sides are aligned and inserted into the pre-determined holes on the bracket, tighten the nuts and seal the excess holes

وصف

AUTOMOTIVE ROOF RACK MOUNTING BRACKETS KIT TO HELP YOU SECURELY FASTEN YOUR ROOF BOX

Product Attributes
Colors: Black
Sizes:
U-bolts:
Distance between Studs on Both Sides: 3.3 inch (Inner Side) / 3.92 inch (Outer Side)
Total Size: 4.01*3.39*0.34 inch
Thread Diameter: M8
Nut: 1.95*1.32 inch
Plate: 6.75*1.36 inch
Spacer: 4.76*1.69 inch
Compatible Roof Rack Crossbar Dimensions: Width Less than 3.35 inch, Thickness Less than 1.06 inch
Weight: 29.73 oz
Material: Galvanized Iron, ABS
Packaging: U-bolts*4, Straps*2, Nuts*8, Sealing Stickers*1 Sheet, Washers*4, Instructions*1, Plate*4

Product Installation
(Please refer to the pictures for more visual installation instructions)
1. Place the plates precisely in the pre-set positions of the roof racks
2. Add the washers and place them under each plate
3. Pick up the U-bolts and insert them into the mounting holes on the bracket, so that the ends of the bolts extend smoothly and are ready for subsequent fixing
4. Use the nuts to fix the U-bolts initially, gently tighten them until they fit, there is no need to tighten them completely at this time, so as to leave room for adjustments to facilitate subsequent adjustments
5. Adjust the parts
6. When adjusted to a satisfactory and suitable position, tighten all the nuts completely
7. Cover the unused mounting holes with the sealing stickers in the package
8. If you need to fix the roof cargo further, you can pass the luggage rack straps through the reserved holes for fixing

Product Functions & Features
1. Pre-purchase Note: Please check the applicable car roof rack crossbar size carefully before purchase, if your car roof rack crossbar size is not within the applicable range, it is not recommended that you purchase it
2. Firmly Fixed: Car roof rack mounting brackets kit is a good helper to help you fasten your car's roof box, avoiding the problem of accidental shaking or even falling off, so that you can drive on all kinds of road with confidence"

مرحبًا،

بحث

مميزات خاصة

وصف

منتجات شبيهه