مميزات خاصة

PREVENT BACKFLOW: The brake bleeder one way valve is marked with an arrow to visually guide the direction of the connection, which can avoid air backflow and reflux, making the bleeder process smoother. It reduces the need for repeated bleeding compared to traditional bleeding methods
SEALING FIT: The brake bleeder hose fitting is tightly fitted to the connector and has an excellent seal, so there is no brake fluid leakage. The connector has a 4-section adjustable section, which can be flexibly adjusted to different pipe sizes, making it highly adaptable
DURABLE STRUCTURE: This brake bleeder one way check valve is made of aluminum alloy, high hardness, durability, long-term use will not rust or damage. Brake bleeder hose is made of high-temperature-resistant rubber, which is not easy to aging and cracking
FULLY STOCKED: Package includes 1 check valve (2.1 inches long, 0.5 inches in diameter), 1 inlet tube (0.15 inches ID, 0.24 inches OD, 5.90 inches in length), 1 outlet tube (0.22 inches ID, 0.33 inches OD, 13.97 inches in length), 2 dust caps, 1 brake bleeder connector, 1 connector, and 3 clamps
HOW TO USE: 1. Install the connector and fix the pipeline; 2. Connect the check valve and inlet/outlet pipe in the direction of the arrow, and put the outlet pipe into the oil catching container; 3. Open the bleeder valve with the brake pedal until no air bubbles are discharged

وصف

CLUTCH BLEEDER KIT -- PROFESSIONAL GRADE BRAKE MAINTENANCE FOR MORE RESPONSIVE BRAKES

Product Attributes
Colors: Silver
Sizes:
One-way Check Valve Length: 2.1 inches, Diameter: 0.5 inches
Inlet Pipe ID: 0.15 inches, OD: 0.24 inches; Length: 5.90 inches
Outlet Pipe ID: 0.22 inches, OD: 0.33 inches; Length: 13.97 inches
Dust Cap: 0.46 x 0.4 inches
Brake Bleeder Connector: Length: 1.92 inches, Inlet ID: 0.18 inches OD: 0.42 inches
Connector: Length: 1.61 inches, OD: 0.29 inches
Weight: 1.54 oz
Material: Rubber + Aluminum Alloy
Packaging: 1 x Check Valve, 1 x Inlet Tube, 1 x Outlet Tube, 2 x Dust Cap, 1 x Brake Bleeder Connector, 1 x Connector, 3 x Clamp Clip

Usage Method
1. Assemble and connect the check valve, hose and clamp (Note: The arrow on the check valve points to the direction of liquid flow)
2. Unscrew the bleeder screw
3. Slowly press the brake lever and repeat the above steps until the brake fluid discharged is free of bubbles (when the discharged brake fluid is clear and free of bubbles, the deflation process is completed)
4. New brake fluid can be added to the master cylinder reservoir, but be sure the fluid level is not too low

Product Feature & Functions
1. Built-in precision check valve with clearly marked arrows assures that the brake fluid only goes out and not in to avoid secondary air intake
2. Aluminum alloy material, high hardness, wear-resistant, rust-resistant, can provide a long service life
3. Equipped with a dust cap to protect the bleeder screws from rusting due to dust and air contact

مرحبًا،

بحث

مميزات خاصة

وصف

منتجات شبيهه