This Kit is constructed using High-Quality OEM spec replacements for 1963 Mercury Full Size Passenger Vehicles. These parts are Factory Design and will only work with Stock Vehicles. This Kit Contains All Of The Pieces Below: Outer Tie Rod Ends (Right and Left), Tie Rod Sleeves (2 Each), Sway Bar Links (2 Each), Sway Bar Bushings (2 Each) - 16.2 mm (0.64 Inch), Upper Ball Joints (2 Each), Lower Ball Joints (2 Each), Upper Control Arm Bushings (4 Each), Lower Control Arm Bushings (4 Each), Upper Control Arm Bumpers (2 Each), and Lower Control Arm Bumpers (2 Each). This Kit Also Contains The Cotter Pins, Rubber Grease Seals/boots, Zerk Fittings (When Applicable), And The Bolts For The Ball Joints, Plus The Tie Rod Sleeve Bolts, Nuts, And Clamps.