Great Value XingShengLink no show mesh stabiliser,This stabilizer is so very light for a cut away and it works so well on any machine embroidery project, it is iron on interfacing to the back of stretchy fabric,woven knit fabric, with one fusible (glue) side and one soft side, put it under the fabric,make sure that the adhesive coating (fusible side) of the stabilizer is facing down; iron temperature 135 degree, working pressure 1.5-2.5KGF/CM², working time 10-15 seconds .No pre-shrinking of the tricot is necessary)Do not apply heat directly to the stabiliser (cover it with a cotton cloth), cut away and clean the stabilizer around the stitches after finishing your project