Features:
1. It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms.;
2. Its current transducer is composed by permalloy and hall element, which linearly transform the AC or DC current to AC or DC current voltage;
3. And if connect to an oscilloscope by BNC type connector, you are able to observe the current waveforms; If connect to a multimeter by banana type connector, you can obtain the current data.
Application:
Power circuit measurement and malfunction analysis;
Motor drive of frequency converter (or other electronics) measurement;
Power electronics equipments measurement.

Specification:
DC Current: 1m/10mA
±(1.5%±5mA) 10mA ~ 20A
DC Current: 1mV/100mA
±(2%±20mA) 100mA ~ 40A
±(4%±0.3A) 40A ~ 65A

AC Current: 1mV/10mA
±(2%±30mA) 100mA ~ 10A (40Hz ~ 2KHz)
±(4%±30mA) 100mA ~ 10A (2KHz ~ 10KHz)
±(6%±30mA) 100mA ~ 10A (10KHz ~ 20KHz)
±(8%±30mA) 10A ~ 15A (40Hz ~ 20KHz)

AC Current: 1mV/100mA
±(2%±30mA) 100mA ~ 40A (40Hz ~ 1KHz)
±(4%±30mA) 100mA ~ 40A (1KHz ~ 2KHz)
±(6%±30mA) 100mA ~ 40A (3KHz ~ 5KHz)
±(8%±0.3A) 40A ~ 65A (40Hz ~ 20KHz)

Captured Conductor Size:9mm maximum
Low Battery Indicator:Red LED lighting
Operating Temperature:0℃ to 50℃, 70% R.H.
Storage Temperature:-20℃~+70℃, 80% R.H.
Battery Type:9V DC, NEDA 1604, 6F22, 006P
Weight: 250 gram typical
Dimensions: 195 mm (H) x 70 mm (W) x 33 mm (D)
Output: 1m wire with a BNC connector

Package included:
1 * Current Clamp with BNC Plug
1 * User Manual (English)