This glue remover through penetration and swelling, transforming it from a hard solid into a soft gel, thus losing its stickiness and allowing for easy removal.
Instructions
1. Apply an appropriate amount of adhesive remover to the included brush and evenly apply to the surface of the 502 glue to be removed, ensuring complete coverage.
2. Allow the adhesive to penetrate for approximately 1-5 minutes (for thicker adhesive layers, this may require longer application or repeated application).
3. Wipe with a cloth or gently scrape with a plastic scraper.
4. After removing the glue, wash surface with clean water and soap to remove any remaining adhesive remover.
Precautions
1. Avoid contact with eyes and mouth. Wear protective gloves when handling.
2. For valuables, special coatings, or unknown materials, always test on an inconspicuous area first.
3. Store this product in a cool, dry place. Keep away from open flames, heat sources, and sparks.
4. The speed of adhesive removal depends on the thickness of the adhesive layer, the area covered, and the time required.
5. This adhesive remover works by dissolving and softening the adhesive, not by removing it directly. After dissolving, wipe clean with a paper towel or cloth.
6. The adhesive remover needs to fully bond with the adhesive to dissolve it. If the adhesive remover cannot penetrate the bonded items, it will not dissolve.