Featu res:
Modular design makes it suitable for use with remote output modules, sensors and transmitters. Lightweight and compact structure, easy to install. Intuitive clear reading, high reliability, measurement accuracy of ±1%. High-definition displays show both instant and cumulative flow. Can be widely used to measure diesel, urea, kerosene, gasoline, etc.
Specificat ion:
Thread Size: 1" NPT Female
Material: plastic.
Blue
Repeat: ±0.5%
Measurement accuracy: ± 1%.
Maximum working pressure: 20 bar.
Flow Range: 15-120L/Min
Single Count: 0.00-999.9
Total Count: 0-99999
Error coefficient: 0.1000-9.999
Unit: L/GAL/PTS/QTS
Working temperature: -10°C ~ + 60°C (14°F ~ 140°F)
Operating voltage: 2.3-3.3V
Application: diesel, urea, kerosene, gasoline Battery type: 2 x AAA LRO3 batteries.
Weight: 270g/9.5oz (approx.)

Package L ist:
1 x turbine flow meter.

BAD WORKING AND SOLUTION:
Flow meter is not exact 1. The field calibration method is not correct. New 2 Gauge The flow rate on the meter is below the minimum. Increase flow rate 3. The flow meter is blocked by the dry liquid. Take out the impeller and clean it carefully and make sure the impeller rotates freely. The impeller is wrapped by the sealing material. Remove the meter and make sure the impeller rotates freely. Too close to the impeller. Install correctly 6. Too close to the motor or electronic noise environment. Install correctly.
Reading numbers faded or erased 1. The battery