مميزات خاصة

Avoid Backflow Problem: During the traditional brake bleeding process, brake fluid or air is easily sucked back into the system in reverse, our kit includes a car brake bleeder check valve, which accurately solves this problem and makes every bleeding job in place at once
Good Helper for Bleeding: In the car brake bleeding work, the brake fluid and air discharge depends on our car brake bleeder tool, the hose inside the package can precisely guide the brake fluid and air out of the braking system, it's your necessary car tool
Aluminum Alloy & PVC: Aluminum alloy is used as the material for the one-way check valve in the car brake bleeding kit, which is sturdy and durable, while the PVC hose is transparent, so that you can see the situation inside the hose at a glance, allowing you to grasp the progress of the bleeding
You Will Receive: This is a complete kit, our car brake system bleeding tools includes hose*2, one way check valve*1, brake bleeder cap*2, clamp*3, the brake bleeder cap provides dust protection for the bleeder screws, and the clamp provides a stable tightening force
Bleeding Steps: Our car brake bleed kit does not require complicated steps to use, first connect the one-way check valve to the hose, and then connect the hose to the bleeder nozzle, you can start to bleed the work, the specific steps can be referred to the description of details

وصف

CAR BRAKE BLEEDER KIT, YOUR BRAKE BLEEDER HELPER

Product Attributes
Colors: Transparent
Sizes:
Hose Length: 6.34 inch / 11.85 inch
Hose: ID: 0.16 inch / OD: 0.31 inch
One-way Check Valve Length: 2.23 inch
Weight: 2.4 oz
Material: PVC, Aluminum Alloy, Rubber
Packaging: Hose*2, One Way Check Valve*1, Brake Bleeder Cap*2, Clamp*3

Steps for Product Use
1. Detach the protective cap from the oil drain valve, and then tightly connect the end of the hose to the drain valve connector to confirm that the hose is securely connected
2. Locate the oil filler cap and unscrew the screws of the cap
3. Slowly loosen the oil drain screw using a suitable tool. The old oil in the brake system will now flow slowly out of the hose
4. Add new standardized brake fluid to the inside, taking care to maintain the filling rhythm. At the same time, squeeze the brake by hand, the oil level should be higher than the drain port, which is the core point to avoid air entering the brake line
5. Repeat the above step until you see that the fluid coming out of the hose shows the clear color of new oil and there are no air bubbles, indicating that the old oil in the system has been completely replaced, then you can stop the cycle of action
6. Re-tighten the oil cap with screws

Product Functions & Features
1. The car brake bleeder one way valve in our kits solves the air/brake fluid backdraft problem and improves the bleeder efficiency
2. We provide you with car brake bleeder caps, which can provide good dust protection for the bleeder screws (M6/M8/M10, etc.)
3. The clamps in the car brake bleeding tool have good fastening properties and hold the connection areas firmly, stopping fluid spillage at the source

مرحبًا،

بحث

مميزات خاصة

وصف

منتجات شبيهه