This Kit is constructed using High-Quality OEM spec replacements for 1967 Ford Mustangs with Power Steering. These parts are Factory Design and will only work with Stock Vehicles. This Kit Contains All Of The Pieces Below: Inner Tie Rod Ends (Right and Left), Outer Tie Rod Ends (Right and Left), Tie Rod Sleeves (2 Each), Sway Bar Bushings (2 Each), Sway Bar Bolts (2 Each), Upper Ball Joints (2 Each), Lower Ball Joints (2 Each), Upper Control Arm Shaft Kits (2 Each), Lower Control Arm Bushings (2 Each), Strut Rod Kit (4 Each), and Idler Arm. This Kit Also Contains The Cotter Pins, Rubber Grease Seals/boots, Zirc Fittings (When Applicable), And The Bolts For The Ball Joints, Plus The Tie Rod Sleeve Bolts, Nuts, And Clamps.