مميزات خاصة

Upgraded Tie Rod Boot: Our car tie rod boot has been upgraded in appearance and caliber, with 2 calibers designed on the top and 4 calibers designed on the bottom, and the bottom caliber has been enlarged for improved compatibility and easier installation
Size Information: Our car rack and pinion boot is available for you to cut, the overall length is 8.66 inch, the bottom caliber is 1.66 inch / 2.15 inch / 2.51 inch / 2.69 inch, the top caliber is 0.62 inch / 0.75 inch, please refer to the above information before buying
Thickened Silicone: Silicone is used as the main material of the car rack and pinion bellow, which increases the thickness of the material and incorporates reinforcing rib design on the outside, significantly improving the overall strength and toughness, and is not easy to tear
Provide Protection: In the daily use of the vehicle, the steering system components are easy to contact with dust and so on, which may cause parts aging problems, use our car tie rod boots to protect the steering components and extend the service life of the components
Accessories List: Just slide the car inner tie rod boot into place (can be assisted by tools) and fix it with ties or clamps when installing. Our kit includes clamps*4 (large*2, small*2), tie wraps*6, car inner tie rod boot*2, which is a necessary car accessory for you

وصف

UPGRADED THICKENED CAR INNER TIE ROD BOOT, YOUR ESSENTIAL CAR ACCESSORY

Product Attributes
Colors: Black
Sizes:
Car Inner Tie Rod Boot:
Total Length: 8.66 inch
Top Caliber: 0.62 inch / 0.75 inch
Bottom Caliber: 1.66 inch / 2.15 inch / 2.51 inch / 2.69 inch
Weight: 10.35 oz
Material: Silicone
Packaging: Clamps*4 (Large*2, Small*2), Ties*6, Car Inner Tie Rod Boots*2

Pre-purchase Instructions
Before buying, please check our product size information carefully to see if it meets your requirements

Product Functions & Features
1. Adopting thickened silicone as the main material of car steering rack boot, with anti-aging and flexibility, and has a special reinforcing rib design on the outside
2. Our car rack and pinion boot can block dust and other direct contact with the steering components after use, providing a protective effect

Product Installation
1. Locate the steering rack boot on the vehicle and detach it
2. Wipe down the mounting location
3. Take out the new car steering rack boot and slide it into the corresponding position (it can be installed with a tool to improve efficiency). You can cut the car steering rack boot to fit your needs
4. Secure it with a cable tie or clamp

مرحبًا،

بحث

مميزات خاصة

وصف

منتجات شبيهه