Continuously Variable Speed Brake Lathe
what is the selling point for AM-552? One of the common problems when lathing large brake disc is the vibration and chatter transfer that directly affects the tool-tip and leaves an imperfect cut on the disc surface. AM-552 Brake Lathe is specifically designed these problems by controlling variable-speed driver. For testing, if you stood back and watched a brake lathe machine working on finish cut on a disc, at this moment if you drop a hammer on the floor next to the lathe, you would see a noticeable degradation of the cut at the moment of impact. Vibration causes frequencies which get transferred to the finish cut.
This vibration effect is not obvious in normal size disc, but can be detected in a big disc more than 400mm. There are several ways to it, the best and easy way is to reduce the speed of disc turning. AM-552 adopted the latest technology of "Variable-frequency Drive" than can control and lower the driver speed continuously, giving you the best and smoothest disc lathe.
General View1. AM-552 can work with various types of vehicles directly for lathing.
2. It is upgraded and remodelled according to customer-oriented perspectives, which can make it easier and safer when resurfacing.
3. It can completely solve the problem of brake pedal dithering, brake disc rust, brake deviation and brake noise based on the actual axis of rotation by lathing the defective brake disk in a professional way.
4. contain switch to shut off the machine automatically when finish the lathing of the disk.
5. speed switch to adjust the rotation speed depending on the brake disk type to assure the best lathing.
6- Save cost, shorten the repair time, and reduce the client's complaint.
Technical specifications:Product name: Brake lathe dual functions
Model AM-552
Working height min/max:1m
Drive speed:150rpm with speed control switch.
Electrical specifications:220v/60Hz
Ambient temperature range: -30 to 60c
Car brake disc max diamater:500mm
Car brake disc thickness:6-40mm
Cutting accuracy:0.00-0.003mm
Brake disc runout:0.00-0.005mm with Auto stop switch
Brake disc thickness variation:0.005-0.01mm
Brake disc surface roughness: 1.5-2.0mm
Weight:135kgs
Specification
item
value
Type
Code Reader
Voltage
110v/220v
Drive speed
150rpm with speed control switch
Ambient temperature range
-30 to 60c
Car brake disc max diamater
500mm
Car brake disc thickness
6-40mm
Cutting accuracy
0.00-0.003mm
Brake disc thickness variation
0.005-0.01mm
Brake disc surface roughness
1.5-2.0mm
Weight
135kgs
Packing & Delivery
Use : Not Telecommunication
Item Weight : 138kg
Item Height : 23inch
Item Width : 21inch
Item Length : 23inch
Voltage : standard
Model Name : Continuously Variable Speed Brake Lathe Am-552
Software Version : Continuously Variable Speed Brake Lathe Am-552
Hardware Version : Continuously Variable Speed Brake Lathe Am-552
Item Type : Electrical Testers & Test Leads
Power (W) : standard
Product name : Brake lathe dual functions
Model : AM-552
Working height min/max : 1m
Drive speed : 50rpm with speed control switch
Electrical specifications : 220v/60Hz
Car brake disc max diamater : 500mm
Car brake disc thickness : 6-40mm
Cutting accuracy : 0.00-0.003mm
Brake disc thickness variation : 0.005-0.01mm
Brake disc surface roughness : 1.5-2.0mm
Weight : 135kgs