【PCA9685 Servo Motor Driver】Power supply: DC5-10V; Communication interface: IIC; 16-way steering gear controll; The PCA9685 chip is wrapped in the center of the board.
【PCA9685 Servo Board】6 address select pins so you can wire up to 62 of these on a single i2c bus, a total of 992 outputs.
【16 Channel 12-Bit PWM Servo Motor Driver】12-bit resolution for each output,for servos, that means about 4us resolution at an update rate of 60Hz.
【3 Pin Connectors in 4 Groups】You can plug in 16 servos at one time (Servo plugs are slightly wider than 0.1" so you can only stack 4 adjacent ones on 0.1"-hole female headers.)
【PCA9685 Driver Controller 5V Compliant】You can control it from a 3.3V microcontroller and still safely drive up to 6V outputs, which is good when you want to control white or blue LEDs with a 3.4V+ forward voltage.
وصف
PCA9685 Servo Motor Driver Parameters:
Voltage: DC5-10V power supply
Communication Interface: IIC
16-way steering gear control
PCA9685 Servo Motor Controller Features:
1. PCA9685 is a 16-channel 12-bit I2C-controlled PWM driver with a built in clock.The PCA9685 chip is wrapped in the center of the board.
2. Power input terminal, green power indicator.
3. 3 pin connectors in 4 groups, you can plug in 16 servos at one time.(Servo plugs are slightly wider than 0.1" so you can only stack 4 next to each other on 0.1" header.)
4. "Chain-able" design: A spot to place a big capacitor on the V+ line.
330 ohm series resistors on all the output lines to protect them, and to make driving LEDs trivial.
5. Connector jumpers for the 6 address select pins.