1. It meets the Serial ATA 3.0 specification, retrocompatible with SATA1.0; It complies with PCI-Express V2.0, retrocompatible with PCI-Express V1.0.
2. Admit communication speeds of 6.0 Gbps, 3.0 Gbps and 1.5 Gbps; It is compatible with gene 1i, gen 1x, gen 2i, gen 2m, gen 2x and gen 3i.
3. Admits AHCI1.0 mode and Native Commands (NCQ), FIS -based on port multiplier switch or command switching and hot connection.
4. Compatible with hard drives SATA6G, 3G and 1.5G.
5. User with data cable for better results.

Specification:
Item type: PCI-E to Card 3.0
Model: PCE8SAT-A01
Teacher: Apt for 88se92xx+jmb5xx
Interface: PCI-e 1x 2x 4x 8x 16x
Support: suitable for 7/8//10 suitable for
Expansion interface: 8 interfaces

Packaging list:
1 x expansion card
1 x semiialto deflector
1 x hard drive

Grades:
1. PCI -e must have a slot greater than V2.0, V1.0 will not exceed 250 m, PCI -E can be x1 or x16 whenever it is version V2.0, there is a groove x16 spare directly in slot x16.2. Bois configuration of the motherboard: The mode must be changed to AHCI, although some PCIe motherboards are version 2.0, but BOIS does not enable the high speed transmission mode by default (high speed Gen2 mode) must be activated manually. In PCI -E 1.0, 200-250 m mode, Mode 2.0 is below 350-400 M. If you do not accept it, change the motherboard.
3. When the port is used at the same time, it will slow down. It is not suitable for users looking for speed. It is used for the extended interface of the hard drive.