1° DELRIN SHIM FOR ELEVATION CORRECTION – Designed to install between your red dot sight and optic plate, the 1-degree tapered shim adjusts elevation angle when zeroing isn't possible. A simple fix for maxed-out elevation screws or dots sitting too high during adjustment.
WIDE OPTIC COMPATIBILITY – Fits Holosun 407K/507K, EPS, EPS Carry, Shield RMS/RMSC/SMS/RMSW, ADE RD3-018 SPIKE, Romeo Zero, Delta Point Pro, JP Enterprises JPoint, and Sentinel. Not compatible with RMR, SRO, Docter, Venom, Viper, Fastfire, or ADE RD3-006/009/012/013.
FIXES MAXED-OUT ELEVATION ISSUES – Some optics can't be zeroed properly because the elevation screw bottoms out before the dot aligns. This 1° angled shim helps realign the optic's position so users can achieve proper zero.
SOLVES ELEVATION MAX-OUT ISSUES – If the red dot's elevation screw maxes out before the dot lowers enough to zero, this shim provides a rear lift that raises the optic, allowing the dot to shift lower into proper zeroing range. No need to return the sight. Position the thicker side toward the rear of the slide to lower the dot. Position the thicker side toward the front of the slide to raise the dot.
PRECISION-TAPERED 1° SHIM FOR ZERO CONTROL – Engineered with a 1.0° taper and ±.005 tolerance, this shim fine-tunes elevation by changing optic angle. Thicker side at rear lowers dot; thicker side at front raises it—simple positioning, precise results.