This MESR-100 V2 auto-ranging capacitor ESR and low Ohm meter measuring range from 0.001 to 100.0R, support in circuit testing. Using true 100 KHz sine w-ave to measure the ESR value, which is equal to the testing method of capacitor manufacturer.

Features:
It is a series resistor inside capacitor, using 100kHz to remove the impedance 1/(2*pi*F*C).
Our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a result we can use it as in circuit test.
During repairing TV, LCD, Audio board, etc. we can in circuit testing the capacitor is good or not.

Specifications:
Range Accuracy(After zero, Refresh Time(Manual Mode)
d with 1,10,100R Auto mode take 0 to 2s, more time
resistor) depends on capacitance value.
0.000 to 1.000R 1%+2Digit ～0.4s
1.000 to 10.00R 1%+1Digit ～0.4s
10.00 to 100.0R 2%+1Digit ～0.4s
Accuracy: Up to 1% (detail on above table)
Wide Measurement Range: >1uF
High Resolution: 4 digit, or 0.001Ohm @ 1 Ω range
Measuring voltage: External Power: 5V micro USB
Operating Current: 0.02A
Battery: 2 * AA 1.5V Battery (not included)
Battery Life time: >80 Hours

Package List:
1 * Capacitance Meter
2 * Test Clips
1 * SMD Clip
1 * User Manual

Note:
The Capacitance Meter is used for testing the internal resistance of the capacitor, not for testing capacitance value.