مميزات خاصة

Material-The glass hole saw adopts diamond dust coating that offers superior performance and cutting strength. The body is made of industrial grade carbon steel to resist corrosion.
High Efficiency-Slotted edge makes it more sharp, works more efficient. Side open can remove the waste to keep the drill bit clean.
Dimension-Cutting Hole Dia: 1-1/4"/32mm;Shank DIa:3/8"/10mm;Cutting Length:1.57"/40mm; Total Length:2.95"/75mm
Wide Application-The diamond coated drills are suitable for drilling glass,tiles,porcelain stoneware,granite slabs,tiles. Fit for any diamond tipped drill bits of any brand.
Diamond Coating Tip Pilot Bit Design - Hard pilot bit can locate the position precisely and protect hole saw blade from impacting when the pilot drill bit through the cutting material. Please start drill at 45 degree to surface and align to 90 degree as hole forms. Water is required to cool down the drill when using them.

وصف

Dimension
Cutting Dia: 1-1/4"/32mm
Cutting Height : Approx. 1.57"/40mm
Shank Diameter : 3/8" / 10mm(Angle to Angle)

Package Content
1 x Diamond Hole Saw + 1 x L Wrench + 1 x Pilot Drill Bit

Durable material
Diamond drill bits are made of high speed materials. The thickened diamond coating on the top provides the ability to improve sharpness and cutting speed

Widely used
Diamond coated bits are suitable for drilling glass, ceramic, light stone, limestone, granite, tile, SLATE, glass fiber, etc

Please Note
1. Start drilling at 45 degrees on the surface and align 90 degrees as the hole form.
2. Use water to cool the drill.
3. Since the product is measured by hand, please allow a difference of 1-2 mm, thank you!

مرحبًا،

بحث

1-3/16 "/30 مللي متر ديا الزجاج هول المنشار دياميند ثقب القاطع الماس لقمة ثقب لبلاط الزجاج السيراميك

مميزات خاصة

وصف

منتجات شبيهه