BLAJR car sticker Made from premium PVC material, this premium vinyl becomes does not crack, fade and flake. And it 's waterproof, making the becomes more durable.
【 Cool Decor 】BLAJR Stripe stickers can be placed on the hood of your car, the sides of your door, the rearview mirror, or anywhere else you want to modify your car. It will make your car look cooler, more different, more linear, more aesthetically pleasing.
[Easy installation] There is an adhesive on the back, just peel and paste. There should be no residue in the disassembly process. For better results, please do not apply when the car is hot, do not wax when washing the car. After pasting the sticker 72 do not wash the car, do not go on the highway, 72 hours after the car wash will not fall off.
【 Easy Removal 】 Gently scrape the edge of the sticker with your fingernail, removing it completely without leaving marks or damaging the paint. In the winter, you can remove the stickers by heating them with a hair dryer.
[Precautions] Bubbles appear in the transfer film due to winding packaging. But the stickers are good and have no effect on your stickiness or effect. Once the sticker is in place, the transfer film can be removed.
وصف
Material: Vinyl sticker/PVC material. Size: Door 74.8 by 4.5 inches (2 PCS) hood 47 by 5.9 inches rear view mirror 5.9 by 1. Inch color: Black/red/white/light gray/rose. Package includes :5* stickers. Applicable model: Suitable for most SUVs, pickups, cars, trucks pay attention to the installation and cleaning of the body needs to stick to the parts. 2. Select a paste position. Put the back of the decal up, tear off the adhesive on the surface, spray some water and glue on the car body to be attached (reduce the viscosity, easy to adjust). 3. Lift one side of the sticker and slowly scrape it from the other side with the card (the same operation as applying the mobile phone film) to remove the bubbles and adjust the position of the sticker. Excess stickers on doors and seams can be cut off with a knife. (Use a needle to solve bubbles that cannot be scraped off.) After 2 hours, remove the transfer film after the label is completely dry. Note: Do not use stickers when the car is very hot. - Do not wax the sticker for 7 days before applying it. The wax will make the sticker unstick. In the pasting process, do not pull the adhesive hard to prevent its elongation and deformation.