High quality ignition coil for several Honda 100/125cc bikes from the early 70''s. It comes with a 90 degree spark plug cap installed for a quick and easy installation! Get that CB125S sparking again and back on the road!
We also carry points for many of these models .
Note: If the spark plug cap included doesn''t fit your model, unscrew it and install your stock cap. Or purchase a new one .
Mounting Hole Spacing: 90mm (3.5") (measured center to center)
Overall Width of Mounts: 100mm (3.9")
Coil Length: 64mm
High Tension Wire Length: 12" (spark plug wire)
Low Tension Wire Length: 8.5" (male / female bullet terminals)
Primary Resistance: 3.6 ohms +/- 10%
Secondary Resistance: 16k ohms +/- 10% (With spark plug cap)
Secondary Resistance: 11k ohms +/- 10% (Without spark plug cap)
Voltage: 6V
Replaces Honda part numbers: 30400-107-007, 30530-330-405, 30400-107-154, 30400-330-003, 30530-330-003
CB100K Super Sport - 1970-1972
CL100K Scrambler - 1970-1972
CL100S Scrambler - 1971-1973
SL100K Motosport - 1970-1973
XL100K - 1974-1976
CB125S - 1973-1978
CL125S Scrambler - 1973-1974
SL125K Motosport - 1971-1973