Tire Pressure Relearn Tool
Usage method
1. - Enter leaning mode
Set the gearshift lever to "P"
Put the ignition switch to "ON"
Enter the interface of tire pressure display by DIC
DIC shows "Press Set / Ctrl to re-learn"
Press "Set / Ctrl"
The turn signal is lighted for 3 seconds and the horn beep sound twice to enter the learning mode
2 - Read tire pressure sensor information
Start from the front-left wheel, Make the Tool EL-50448 antenna up against the valve core position and close to the rim of the tire sidewall
El-50448 tire pressure tool starts by the start switch
Successful to read the tire pressure sensor information when the horn bleepsonce
3 - Same method to read other tire pressure information
Follow the instuction above to read tire pussure of the front-right, rear-right, rear-left wheels
Turn signals is lighted for 3 seconds and the horn bleeps twice when the learning is complete
Please note: Hold the tool against the sidewall of the tire, near the valve stem to read sensor information, it won't work if on an inappropriate position.