Throttle Valves
The Use Of Speed Control Valve:
1. It is forbidden to use tools other than hands to turn the adjusting cap. When the adjusting cap is in the upper/lower limit position, no extra external force shall be applied to it, otherwise the valve body may be damaged and air leakage may occur;
2. When the speed control valve is closed, partial air leakage is allowed. Therefore, it is not recommended to use the speed control valve for occasions where internal leakage is strictly prohibited.
Product Feature
1. Variable Models Can Be Widely Used In Every Kind Of Pneumatic Systems.
2. High Circulation Performance: Bear The Same Flow With The Volume Of The Tubing Inside Diameter.
3. Connect Tubing Easily And Conveniently. The Tubing Connection Portion Is Safe And .
4. The Threaded Portion Is Covered With Sealant And The M5 Thread Is Attached With A Sealing Gasket To Prevent Air Leakage Over The Connection Thread Portion.
Installation And Removal Of Tubing
1.1 Installation Of Tubing Grasp The Tubing And Slowly Push It Into The Fitting Until It Comes To A Stop. The Tubing Will Be Locked By The Spring Gasket.
1.2 Removal Of Tubing Push The Release Button To Open The Spring Gasket So That The Tubing Can Be Released.
Note: When Remove The Tubing, Make Sure The Pressure In The Tubing Is Zero.
==========
Type : Fittings
Model Number : PA APA APAM
Typt: : Fittings
Joint ize: : 4mm, 6mm, 8mm,10mm,12mm