The story of Radiator
In the 1930s, the modern pressurized radiator was developed. This design used a pressure cap to increase the boiling point of the coolant and allow for efficient cooling. The pressurized system also allowed for the use of smaller,lighter radiators that could be mounted in front of the engine and improve aerodynamics.

Fitment
for Buick
for Envision 2016-2020

Part Number
GM1218166,17151737,22928071

Part Name
Radiator Air Seal

Quantity
Sold Individually

How to install Radiator
To install a radiator in a vehicle, you will need a few basic tools, such as a socket set, wrench set, and screwdriver. You may also need a novel radiator hose and any other mounting hardware that is required.First, locate the mounting points for the radiator on the vehicle. These may be located on the radiator support, the frame, or the body of the vehicle.Next, attach the mounting brackets for the radiator to the vehicle using the screws or bolts provided. Make sure that the brackets are secure and properly aligned.Then, attach the radiator to the mounting brackets using the bolts or screws provided. Some radiators may require additional mounting hardware, such as nuts or washers. Follow the instructions provided with the radiator to ensure that it is properly installed.Next, attach the radiator hose to the inlet and outlet ports on the radiator. Make sure that the hose is properly fastened and tightened.Finally, refill the cooling system with the proper type and amount of coolant, and bleed any atmosphere from the system according to the manufacturer's instructions.