Breather Filters
Product description
1. Loosen self-venting drain to drain water from bowl into a container.
2. Tighten drain.
3. Use primer bulb to fill filter with fuel.
4. Start engine and check ensure there are no leaks.
Model: S3227
To Replace
1. Loosen self-venting drain and drain the sinto a container.
2. Remove filter sfrom mounting bracket with bowl connected.
3. Remove bowl from filter sand clean o-ring gland on bowl. BOWL IS REUSABLE * DO NOT DISCARD.
4. Lubricate o-ring with oil or grease and install on bowl.
5. Install bowl onto , tighten by hand.
6. Lubricate filter top seal with oil or grease.
7. Fill filter/bowl assemble with clean fuel and attach onto mounting bracket, tighten by hand.
8. Start engine and check to ensure there are no leaks.
Package Contents:
TYPE1: 1Pc* Filter element
TYPE2: 1Pc* Filter element with Bowl
TYPE3: 1Pc* Fuel water separator,2Pcs*Screws
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.
The measurement allowed error is +/- 1-3cm.
==========
Other Part Number : S3227
Interchange Part Number : S3227
Item Weight : 1.2KG
Item Height : 100mm
Item Width : 101mm
Item Length : 235mm
Part Number : S3227
Material : Aluminum