This is the first and onlyFront Seat Lift Kit for the JL's and JT's by Ohio Diesel Parts that provides everything you need to modify the front seat of your Jeep into a higher more comfortable position. Our kit will allow you to gain approximately 1”-1.5” inch of height to give you a better vantage point and more support under your knees. Tested and verified, this creates a much more comfortable riding experience for driver or passenger. This kit works especially well if you are short in the height department because the stock seats are low compared to the dashboard. Increased height gives a better angle of view out of all the windows. Great for passengers as well because the stock passenger seat has no height adjustment. The driver side does include height adjustments but this kit still works in all positions and gives a nice boost if you like to off-road or want a better look around your vehicle. This kit will lift either the driver or the passenger side. If you want to lift both seats, two kits are required. Upgraded longer hardware is included and it is metric class 10.9 which is the OEM quality and strength. These blocks have a black finish that will blend in with standard interiors.

INSTALLATION:

Compatible with all Jeep Wrangler JL 2-Door, JLU 4-Door, and JT Gladiator Trucks model years 2018+.
Easy installation requires 5/16” socket, 17mm socket and ratchet. However a breaker bar or impact gun will make installation easier and is recommended to remove factory bolts but is not necessary. A T50 TorX bit is provided for factory bolts. Spacers install under front seat brackets. The 1” Blocks install under the front brackets using the socket-head cap screws. The 1.5” Tall rectangular spacers install under the rear brackets using the hex-head bolts and washers. Bolts pass all the way through spacers and thread into place. Detailed Step-by-Step instructions with pictures are provided.