1 جهاز كمبيوتر محرك محور محور ختم النابض - تصميم متعدد الخطوط محمّل ، قطر عمود 1.850 بوصة ، 3.161 بوصة خارج القطر ، عرض 0.394 بوصة ، لخدمة المحور الأمامي الذي يتطلب 710595 الحجم
Maintain seal integrity – Spring‑loaded, multi‑lip configuration helps retain lubricant and limit contamination at the axle interface during service.
Verified dimensions – Inside/shaft diameter about 1.850 inches (47.00 mm), outside diameter near 3.161 inches (80.30 mm), and seal width around 0.394 inches (10.00 mm).
Application range – Suitable for front axle locations on light trucks and SUVs that specify this boundary size; verify housing bore and shaft dimensions before ordering.
Service friendly – Designed for press‑in installation using standard seal drivers; seat squarely to a housing bore near 3.154 inches (80.10 mm).
Material callout – Typically offered in fluoro‑elastomer with bi‑directional lip helix for broad temperature and fluid compatibility.
وصف
This axle shaft seal features a spring‑loaded, multi‑lip geometry intended to keep lubricant in and block debris at the front axle interface. Boundary details commonly specified include a 1.850 inch shaft diameter, 3.161 inch outside diameter, and 0.394 inch width, with a housing bore near 3.154 inches for proper press fit. Listings also note a bi‑directional lip helix and fluoro‑elastomer construction, supporting use across typical temperature ranges and fluids in light‑vehicle front axle service. Installation uses a suitable driver to press the seal squarely into the bore to the proper depth. Always confirm the seal's dimensions and position before installation for the best result.