Electronic Engine Control
Production Description
The GU611A is an Automatic Mains Failure Controller. When running in "AUTO" mode, it detects the Mains. It starts the generator automatically on Mains voltage failure, Gen is on load;
when Mains resumes to normal, it stops the generator after delay, Mains is on load. The controlling procedure and protection parameters for generator can be modified, which fully meets the Genset's requirements of automatic start, stop control and basic protection.
Technique Specification
working power
Voltage range: 12V/24V (8-35V continuous)
Cranking drop outs: 0V for 100mS, assuming supply was at least 10V before dropout and recovers
to 5V
Max. operating current: @12V 180mA, @24V 90mA
Standby current: TBA
AC input voltage: phase voltage15-300Vac RMS (AC frequency40 Hz)
AC input frequency: 3-70Hz (voltage 15V)
Accuracy: 1%
Aux Control relay output: 3A/30Vdc
Start relay output: 3A/30Vdc
Fuel relay output: 3A/30Vdc