Electronic Engine Control
Genset Controller DC7XD Series This series controller is specialized for Diesel / Gasoline / Gas Genset Start, Stop,Parameters monitoring, faults-checking as well as data setting.
difference:
DC72D: Add Mains status showfunctionbased on DC70D;
DC70DR: Add RS485 interface based on DC70D;
DC72DR: Add RS485 interface based on DC72D;
4.3 inch colorful screen display with UI design is adapted in this controller that the relative failures can be displayed directly. All the parameters can be displayed by simulated indicators and words.Besides, screen can display various faults in the same time that the genset will be stopped once it can not work smoothly.
There are Chinese/English interface options, more language can be set according to user's request. All the parameters can be configured through the front
face buttons or use programmable interface by RS485 or USB to adjust via PC.It can be widely applied for all kinds of auto control system of gensets.
Parameters
Options
Parameters
Working voltage
DC8V----36V Continuous
Power consumption
Standby:24V:MAX 1W
Working:24V:MAX 5W
AC Voltage Input
1P2W 30VAC-276VAC(ph-N)
2P3W 30VAC-276VAC(ph-N)
3P4W 30VAC-276VAC(ph-N)
Rotate speed sensor Frequency
200-10000Hz
MAX Accumulating Time
99999.9Hours(Min Store time:6min)
Fuel Relay Output
16Amp +VE Supply voltage
Start Relay Output
16Amp +VE Supply voltage
Programmable Relay output 1
5Amp +VE Supply voltage
Programmable Relay output 2
5AMP Non-contact-Normal open--Normal close output
Programmable Relay output 3
5AMP Non-contact Normal Open output
Programmable Relay output 4
5AMP Non-contact normal open output
Programmable Relay output 5
5AMP Non-contact-Normal open--Normal close output
Excitation output
Max 1AMP +VE supply voltage
Switch value input
Available if connecting with Battery -
Working condition
-20-65
Storage condition
-40-85
Protection Level
IP54:when waterproof rubber gasket is added between controller and its panel
Overall dimension
210mm*160mm*50mm
Panel cutout
186mm*142mm
Weight
0.9Kg