How do I connect Wii console?
Step 1: Open your Wii console;
Step 2: Insert 2 AA batteries (not included) into the remote control;
Step 3: Push the small button on the controller (where the batteries go) , four lights (The player LED) on the controller will flash.
Step 4: Open the SD slot on the Wii console, you will find a red sync button next to the SD slot. Then press this sync button.
Step 5: Wait for a few seconds, the player LED on the controller will stop flashing and light up when paring is complete.
Step 6: The player LED indicates the player number of the controller currently in use.
Low-power instructions:
Low voltage: The connection indicator flashes quickly.
Please replace the new batteries in good time when the low voltage alarm occurs.
If the connection is lost, please check:
1. If the battery voltage is below 2.3V, the connection may be broken. Please change to new batteries.
2. The batteries could be loose.
3. Too bright to lose the connection. Please avoid towards bright lights, or the connection could be distracted.
4. Please do not use the controller too close or too far from the Wii host. Keep the distance between 3-5 m.
5. You can try holding down the red button on the back of the controller (SYNC button) and the SYNC button on the Wii host.
Package Included:
1 x Wii Remote controller with built-in motion plus
1 x Wii Nunchuck
1 x case for remote
batterires are not included
Notices:
for Wii U console, please open the Wii U menu and then follow the on-screen instructions and press sync on the controller to finish the pairing procedure.
The product contains the remote controller only. No nun chuck controller or motion plus adapter the screen.