Electronic Engine Control
The DSE6110 is an Auto Start
Control Module and the DSE6120
is an Auto Mains (Utility) Failure
Control Module suitable for a wide
variety of single gen-set
applications.
Monitoring speed, frequency,
voltage, current, oil pressure,
coolant temperature and fuel level,
the modules will display warnings,
shutdown and engine status
information on the back-lit
screen and illuminated LED.
Both modules offer electronic
(CAN) and non-electronic (magnetic
pick-up/alternator sensing) engine
versions and offer a number of
flexible inputs, outputs and engine
protections so the system can be
easily adapted to suit a wide range
of application demands.
The modules can be easily
configured using the DSE
Configuration Suite PC software.
Selected front panel editing is also
available.

SUPPLY
CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous
CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing
supply was at least 10 V before dropout and
supply recovers to 5 V. This is achieved
without the need for internal batteries.
LEDs and backlight will not be maintained
during cranking.
MAXIMUM OPERATING CURRENT
178 mA at 12 V, 95 mA at 24 V
MAXIMUM STANDBY CURRENT
88 mA at 12 V, 50 mA at 24 V
CHARGE FAIL/EXCITATION RANGE
0 V to 35 V
MAINS (UTILITY) DSE6120 ONLY
VOLTAGE RANGE
15 V - 333 V AC (L-N)
FREQUENCY RANGE
3.5 Hz to 75 Hz
OUTPUTS
OUTPUT A (FUEL)
2 A at supply voltage
OUTPUT B (START)
2 A at supply voltage
AUXILIARY OUTPUTS C,D,E & F
2 A at supply voltage
GENERATOR
VOLTAGE RANGE
15 V 333 V AC (L-N)
FREQUENCY RANGE
3.5 Hz to 75 Hz
MAGNETIC PICK UP
VOLTAGE RANGE
+/- 0.5 V to 70 V
FREQUENCY RANGE
10,000 Hz (max)
DIMENSIONS
OVERALL
215 mm x 158 mm x 42 mm
8.5" x 6.2" x 1.6"
PANEL CUT-OUT
182 mm x 137 mm
7.2" x 5.4"
MAXIMUM PANEL THICKNESS
8 mm
0.3"
STORAGE TEMPERATURE RANGE
-40+85