Specs:
Cable Included:No
Carburetor Choke Type:Electric
Carburetor Mounted:Yes
Category:Air and Fuel Delivery
Emission Code:5
Grade Type :Performance
Kit:Yes
Part Type:Carburetor Choke
Product Type:Choke Conversion
Sub Category:Carburetion
Terminal Type:Blade
Part Number:45-223

Warning:
Correct polarity must be observed when connecting the electric choke wires. Connecting the (+) lead to ground and the (-) lead to a 12V source will result in a direct short and could cause a fire. The 12V source selected should be fused. If not, an inline fuse rated at 10 amps should be installed.
Connecting the choke cap to the ignition coil will result in unacceptable choke operation. This could cause engine misfiring (resulting in possible engine damage). DO NOT connect the choke wire to the coil!
If the choke is not fully open after the engine is warm, poor gas mileage, fast idle speed, and/or engine damage could result.

Note:
On most applications, your original choke rod will be used. However, on certain carburetors the new choke rod supplied with the kit may have to be used.
Do not recommend using the 12V side of the coil for your power source.