JAOYSTII 3D Analog Joystick Replacement
Replace your broken, worn-out or damaged Joy-Con analog joystick. Enjoy your Joy Con on a budget.

Note:
Before disassembling the Joycon, we recommend that you prepare professional repair tools
(including "Y"2.0 triwing screwdriver or "Y"1.5 triwing screwdriver, "+"2.0 phillips screwdriver, tweezers, pry bar, pry opening repair tool).
Before disassembling the Joycon, we recommend that you watch the full tutorial on YouTube.
When disassembling the Joycon, please be careful for the cables.
After disassembling the Joycon, please calibrate the joystick by using Nintendo Switch setting after installation.
Please restart the Switch when it drifts after installation.

Tip:
①The joystick cannot extend to the up/down/left/right vertical position after installation?
②The joystick is out of the center after installation?
③The joystick drift after installation?
Please follow the steps below (support the version 10.0.0 and above systems)
1. Please calibrate the joystick replacement.
2. After calibrating it, please turn off the Switch console directly.
3. Then turn on the Switch console. The joystick replacement could work.
NOTE: In either case, please calibrate it according to the instructions
Please don't shake the joystick replacement when turning off and turning on the console

Feature:
--Compact and wear-resistant material
--Upgraded quality
--Easy to install

What's Included:
4 x Joystick Replacements
4 x Thumbstick Caps
4 x "Y" Screws
4 x "+" Screws

Satisfaction Guarantee:
If you have any question about the analog joystick replacement, please feel free to contact us. We will reply you within 24 hours.