Applicable Sewing Machine: The seam roller tool for sewing is suitable for household sewing machine and electric sewing machine, but not suitable for industrial sewing machine and mini sewing machine.

Installation Steps of The Hem Foot for Sewing Machine
◆1. Rotate the hand wheel forward, lift the needle to the highest position, and raise the sewing foot.
◆2. Press the wrench on the presser foot bracket at the back, and loosen the presser foot.
◆3. Install the presser foot so that the pin of the presser foot plate is just facing the groove of the presser foot handle, put down the presser foot plate hand, and the presser foot will be fixed in its position.

How to Use Wide Hemmer Foot for Sewing Machine
◆1. Please loosen the screw of the presser foot before your installion.
◆2. Insert the fabric into guide groove of presser foot, slide around the guide groove of the presser foot to adjust the appropriate position for the width of fabric.
◆3. Tighten the screws and draw the fabric to the back of guide slot.
◆4. Attach the presser foot with fabric equipped to your sewing machine,Start your sewing machine up, and you need to pull the end of the fabric outward during the operation of the sewing machine, then this operation can be kept running.