Net2 plus is a networked access control system. A networked system gives the advantages of central control, event reporting and flexible control over users' access. Each control unit is part of a network but can run independently making its own decisions and remembering events. One Net2 plus control unit can be the network interface to the LAN and also run a wired RS485 daisy chain of other Net2 plus or Net2 classic units, removing the need for an independent TCP/IP to RS485 converter. Net2 plus is available with 12/24V power supply AC DC, power over ethernet (POE), or trigger disconnect power supply, which is suitable for fire alarm disconnect. PoE is a technology that allows both power and data to be passed along Ethernet cabling. Net2 plus with PoE simply plugs straight into the existing LAN using a standard RJ45 plug (providing it is powered by either a PoE switch or a PoE injector). Control units are sold as a PCB board only or within a plastic housing. The Net2 plus unit now comes with PoE+ power supply in metal/plastic cabinet; no separate mains supply back-up required. Main Features: � Single door networkable access control unit � Plug into a TCP/IP network using a standard RJ45 plug � Net2 plus can replace a TCP/IP convertor � Net2 plus can also connect using RS485 � Net2 plus, Net2 classic and Net2 nano control units can be mixed on a site � Diagnostic LEDs � FLASH memory allows easy upgrades � Use Paxton Access or 3rd party readers