1.Interface:USB 2.0 Full Speed Device (HID) Humans Input Device
2.Power:From USB port
3.Supported Operating Systems:Windows XP, Windows 7, Windows 8.1, Windows 10,Linux, Android
4.Standard:ISO/IEC 14443 TypeA
5.Support the card type:Mifare Classic Protocols card, UltraLight, UltraLight C, T=CL CPU card,Ntag213, Ntag215, Ntag216, DESfire
6.Operating Distance:Up to 50 mm
7.Format:10 digit dec(Defoult output format) (Allow user to customize the output format by software)
8.Buzzer:Monotone
9.LED Status Indicators:4 LED (green and blue)
10.Dimensions:125mm (L) x 95mm (W) x 28mm (H)
11.Weight:150g
12.Temperature:0°C – 60°C
13.Humidity:10% to 90%, non-condensing
GK-series Contactless Smart Card Reader
Method of installation and use
1. Connect with computer through USB interface directly. When the buzzer sounded, reader into the self-inspection. And the same time, LED turn into red means standby.
2. Open the output of computer software,such as Notepad\a word document or Excel sheets.
3. The mouse in Notepad or WORD document clicking.
4. Put tag on the top of reader, the software will output a data(card number) of the tag. When reading the tag,LED light change from red to green.Detecting device is connected,Open the Device Manager of computer, If appears Humans Input Device that means Reader has successfully into computer.
Precautions
1. Do not install the reader on the magnetic objects and metal objects, they will seriously affect the RF signal.
2. If after reading, the tag is still in the induction zone, the RF reader will not send data and without any hints.
Common problems
1. Operation without feedback: Please check whether the interface plugged in, whether the tag is a valid or whether another RF tag is within the reading range.
2. Data error: Please check Whether the mouse is moved, whether the reader is in a critical state and whether the cable length is too long.