2Pcs 12KG Low Profile Digital RC Servo Full Metal Gear High Torque HV Steering Servo+25T Aluminum Reinforced Servo Arm for 1/10 1/12 RC Drift Car 270 Degree PWM500-2500

Descriptions:
Products Name:12KG Low Profile Digital Servo

Features:
Ultra-Slim Design, Save Space
Height as low as 28.7mm –Space Perfect for tight installations in rc drift cars, on-road,touring cars and other robotic projects.
Note : Please use a standard PWM control signal, the signal period is 20ms, the high level time is 0.5-2.5ms. The maximum rotation angle is 270 degree when PWM500-2500μsec. Remote control only has half of the stroke (Maximum rotation angle is 135° when using remote controller）

Apply Environmental Conditon
Storage Temperature Range : -30°C～80°C
Operating Temperature Range: -25°C～70°C

Standard Test Environment
Temperature Range: -25°C～70°C
Humidity Range: 65%±10%
Mechanical Specification
Size: 40.8*20.2*28.7mm
Weight: 60g
Gear Type: Full Metal
Bearing: Double Ball Bearings
Horn Gear Spline: 25T Diameter: 5.9mm
Case：Engineering plastics(PBT)+Aluminum Alloy
Connector Wire: 320mm±5mm
Motor: Carbon Brush Motor
Splash Water Resistance: IP65

Electrical Specification
Working Voltage Range: 4.8V-7.4V
No Load Speed: 0.12sec/60° at 4.8V 0.09sec/60° at 7.4V
Runnig Current: 210mA at 4.8V 260mA at 7.4V
Peak Stall Torque: 11.5kg.cm at 4.8V 14.5kg.cm at 7.4V
Stall Current : 2000mA at 4.8V 2700mA at 7.4V

Control Specification:
Command Signal : Pulse Width Modification
Amplifier Type : Digital Controller
Pulse Width Range: 500～2500usec
Running Degree: 270°±3°(when 500～2500usec)
Dead Band Width: 3 usec
Rotating Direction : Counterclockwise (when 1000～2000usec)

Package Includes
2 X 12KG Low Profile Digital Servo
2 X 25T Aluminum Alloy Servo Arm
2 X Accessories Bag