Installation Steps (for reference only):
1. Turn off the power supply and disassemble the switch.
2. Strip the insulation from the lamp cord at the location where the switch will be installed, (the length of the stripped insulation depends on the size of the switch).
3. Expose the neutral wire and hot wire.
4. Cut and separate the exposed hot wire.
5. Insert the ends of the cut and separated hot wire into the small holes on either side of the switch.
6. Route the neutral wire into the track labeled "N" on the base.
7. Place the spring over the switch.
8. Place the button over the spring and switch.
9. Squeeze the top and base together completely to ensure a firm fit.
10. Tighten all screws.
11. Turn on the power supply and press the button to check if it works properly.

Product Name: Floor foot switch
Material: Pure Copper Plated with Nickel&PP
Color: Black
Size: 69.2×29.5mm / 2.72×1.16 inches (Dia×H)
Compatible Wire Gauges: 0.3 to 0.75 mm²
Voltage/Current: 2A/250V, 3A/125V;
Rated Power: 100W
Weight: 26g / 0.92oz per
Package List: 2 pcs inline foot pedal

Note:
1. For indoor use only. Do not expose to water or use in high humidity areas.
2. To prevent the electric shock, please disconnect the power supply before installation.
3. If you lack of electrical knowledge, it is recommended to hire a professional electrician for installation.