Features
Epoxy resin can be cured at room temperature, volume ratio 1:1, very easy to operate, with low viscosity, good fluidity, natural defoaming characteristics, anti-yellowing, high transparency, no ripples, bright surface, low viscosity.

Application field
MZHOU epoxy glue can be widely used for crafts, handmade jewelry and mold filling etc.

Operation
1. Weigh glue A and glue B according to the given weight ratio and put them into a prepared clean container. Mix thoroughly then rotate the container clockwise and let stand for 3 to 5 minutes.Then it is ready for use.
2. Use the glue according to the time and amount of the mixture to avoid waste. When the temperature is lower than 15 degree Celsius, heat Glue A to 30 degree Celsius before mixing with Glue B (Glue A will thicken at low temperature): 2. The glue must be sealed with a lid after use to avoid waste products due to moisture absorption.
3. When the relative humidity is higher than 85%, the surface of curing mixture will absorb the moisture in the air and form a white mist on the surface, so when the relative humidity is higher than 85%, it is not suitable for room temperature curing, and it is recommended to use heat curing.

Storage temperature
1. Store at 25°C or in a cool, dry place. Avoid direct sunlight, high temperature or high humidity.
2. Use as soon as possible after opening. Prolonged exposure to air after opening is strictly prohibited to avoid affecting product quality.
Note:The above data are typical data measured in a laboratory environment with a temperature of 25°C and a humidity of 70%. It is for customer's reference only.

Product ingredients (composed of a mixture of harmless additives)
Polymer of (1-methylethylidene)bisphenol and (chloromethyl)ethylene oxide (80-90%)
Benzyl alcohol (9-19%)
Ethyl benzoate (1%)

WARNING
This product contains small parts and a plastic bag and is only suitable for persons aged 15 years and over.

Precautions
1. The operating environment should be ventilated and kept away from ignition sources. It should be sealed after use. 2. Avoid contact with eyes, once contacted, flush with plenty of water and seek medical attention immediately.
3. If contact with skin, wrap with clean cloth or paper and wash with water and soap.
4. Please try it before use to avoid using it wrongly.

Packing list
1x 250ml Casting Resin-A
1x 250ml Curing Agent-B
2x 60ml measuring cup
3x Stirring Stick
3x Dropper
5x Disposable gloves

MZHOU is committed to providing high-quality product and sales services,feel free to contact us if you have any questions, we will reply to you within 12 hours.