*** ESC Features:
- FOC (Field-Orientated control technology)
- Live tunning on Furicar app
- Super slow and ridiculously smooth throttle control
- New firmware algorithm to consistently smooth up the start up to FOC stage
- Work with Brushed/Brushless motors (config via app, default is brushless)
- Small size and light weight
- Super easy programming via App on both Android and iOS
- Real-time telemetry up to 10Hz
- Bluetooth module controlled by Furicar App included
- Waterproof and dustproof with an enclosing CNC aluminum case
- Over-temperature and max current protection
- AUDIBLE ALERTS for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff.
- FREE lifetime firmware updates
*** Motor Features:
- High low-end torque
- Low KV rating provides more torques at low speeds.
- Efficiency cooling system
- High-quality material with reliable magnets and durable bearings
- High-end CNC aluminum case
- Special designed 12S-14Pole Outrunner brushless motor for high torque output
- Super quiet, high torque, powerful and super slow speed yet tons of wheel speeds when needed
- High purity and higher temperature copper windings -lower copper losses, very good heat dissipating-maximizes efficiency.
- Super thin stator laminations---lower eddy losses---maximizes efficiency. High RPM ABEC5 bearings.
- Precision balanced rotor, smoothness for best reliability, and maximum RPM.
*** ESC Specifications:
- Supports 2-4S lipo batteries
- Selectable 5.5V/7.5V/8.4V (8A peak) BIG internal BEC (Battery Eliminator Circuit), (config via app)
- Constant current: 80A
- Burst current: 120A
- Removable ON/OF switch
- Dimensions: 1.7x 1x 0.4 (inch), 45x25x10 (mm)
- Weight: 41g (1.4oz)
*** Motor Specifications:
- Motor type: outrunner
- KV (RPM/V): 2000
- No-load current @7.4V : 3.0A
- Watt: 680W
- Battery: 3-4S lipo
- Resistance: 0.025Ohm
- Max current: 53A
- Slot/Pole: 12S14P
- Motor size: 28.5x38.5mm diameter
- Weight: 91g
*** Extra requirements:
- The new FURITEK brushless system needs a channel 2 from the receiver to connect to the external ESC. The stock TX/RX does not have a channel 2 so it is required to have a new at least 2-channel TX/RX