Note:
The product must be used in conjunction with a Raspberry Pi 5 and a PoE switch (or PoE injector)
Output power Max.12.5Watt (DC5V2.5A) when used with the IEEE802.3af standard PoE switch(or 802.3af PoE injector)
Output power Max.22.5Watt (DC5V4.5A) when used with the IEEE802.3at standard PoE switch (or 802.3at PoE injector)
Output power Max.22.5Watt (DC5V4.5A) when used with the DSLRKIT Non-standard 48V~52V Passive PoE switches (or 48V~52V Passive PoE injector)
Product Description:
This Raspberry Pi 5 PoE Hat prioritizes safety and compatibility. A Mylar insulating sheet on the back of the board prevents solder points from contacting the Raspberry Pi 5's heatsink, reducing the risk of short circuits. It can be installed alongside the official Raspberry Pi 5 heatsink; however, please note that the fan outlet on this PoE Hat does not align with the intake vent of the official heatsink at all, which may somewhat impact the heatsink's airflow intake.
The PoE Hat powers the Raspberry Pi through a single Ethernet cable, eliminating the need for a separate power adapter. However, please note that a PoE switch or PoE injector is required for operation.
Specifications:
Complies with IEEE 802.3at "PoE+" standard
Compatible with IEEE 802.3af/802.3at Power over Ethernet (PoE) switches and injectors
Supports 48V~57V Passive Power Over Ethernet (PoE) switches and injectors
Power Pin Configuration: Supports both 1/2(+), 3/6(-) and 4/5(+), 7/8(-)
Isolation Voltage: 1.5KV
Power Input: DC 40~57V
Power Output: DC5V 4.5A/22.5Watt
Operating Temperature: -10°C to 75°C
Storage Temperature: -30°C to 80°C
Package Includes:
1 x DC 5V 4.5A Raspberry Pi 5 / RDK X5 PoE Hat
4 x M2.5 Standoffs
4 x M2.5 Nuts
4 x M2.5 Screws