USB2.0 Serial Adapter Cable
PL2303HXD Chip
USB RS232 DB9 com port adapter cable
This cable can turn the USB port in your PC to be a Serial Port to the serial device eg Scanner, printer, etc
Support Windows7/8/10
5,6,7 or 8 data bits
Odd, Even, Mark, Space, or None parity
a half or two stop bits
Parity error, frame error, and serial break detection
Full pinout as standard
About PL2303HXD
Fully compliant with USB specification v2.0(full speed)
On-chip USB1.1 transceiver, 5v-3.3v regulator
On-chip 96MHz clock generator
Support RS232-like serial interface
Full-duplex and receiver(TXD and RXD)
Six modem control pins(RTS,CTS,DTR,DSR,DCD,RI)
5,6,7 or 8 data bits
Odd, Even, Mark, Space, or None parity
a half or two stop bits
Parity error, frame error, and serial break detection
Programmable baud rate from 75bps to 12M bps
External RS232 driver power down control
Independent power source for serial interface
Extensive flow control mechanism
Adjustable high/low watermark level
Automatic hardware flow control with CTS/RTS or DSR/DTR
Automatic software flow control with XON/XOFF
Inbound data buffer overflow detection
Configurale 512-byte bi-directional data buffer
256 byte outbound buffer and 256 byte inbound buffer or 128 byte outbound buffer and 384 byte inbound buffer
Supports remote wake-up from Modem input signals
Four purpose I/O(GP0,GP1,GP2,GP3)pins & four Auxiliary purpose IO(RI_N, DSR_N, CDC_N & CTSN)pins
On-chip OTP ROM for startup device configurations
Support , OS, Linux, and WinCE
The PL-2303HX is a low cost and high performance USB-to-Serial Bridge Controller. The PL-2303HX provides a convenient solution for connecting an RS-232 full-duplex asynchronous serial device to any Serial Bus (USB) capable host. The PL-2303HX highly compatible drivers could simulate the traditional COM port on most operating systems allowing