PH52A PCIE x1 to 2Port SATA3.0 Expansion Card 6Gps Support soft RAID for Desktop Compatible with Wins10 Linux

Product parameters
Name:SATA 3.1 2-port expansion card
Model:PH52A
Input Interface:PCI-E X1 compatible X4/X8/X16
Output Interface:SATA 3.1
Package Size:12*6.5*6.5cm
Product Weight:Product+Baffle 30.6G

Desktop PC PCI-E X1 to SATA 3.1 2-Port Expansion Card
2-port SATA3.1 interface simultaneous expansion
Equipped with two SATA3.1 interfaces, compliant with PCI-E 3.0 specification
Support two SATA hard disk connection, transfer rate up to 6Gbps
2-port SATA3.1 6Gbps transfer interface
Massive transfer, providing a massive database for your workstation and computer equipment.

The system comes with soft RAID, support 4 storage modes
Expansion adapter board supports desktop computer WIN8.164 bit professional version of the system above, the formation of four soft RAID storage mode.
1.RAID1 (Mirror/SAFE mode)
In this mode, two disks mirror each other as a backup, the same information, such as a bad disk just need to
If a disk is damaged, you only need to remove the faulty disk and replace it with a disk of equal or greater capacity to automatically recover the information without losing data.
2.AHCI1 (PM mode)
In this mode, each individual disk to store information without interfering with each other, each disk as an independent body, insert a few disks show a few disks.
3. SPAN (BIG mode)
In this mode, the capacity of all the disks added to the largest disk, the data will be stored on different disks, the disadvantage is that the disk will be lost if the data is damaged and will not be retrieved.
4.RAIDO (FSAT mode)
In this mode, the information will be stored on multiple disks to form a whole, but the capacity of the smallest disk based on the capacity multiplied by the number of inserted disks, the theoretical transfer speed of a single disk 2 times.

Compatible with JMB582 Powerful Chip
Higher transmission speed
Supports PCle Gen3 x1
Supports PCIe Link Layer Power Saving Mode
Supports 2 SATA 6Gb/s

Compatible with PCI-E X1/X4/X8/X16 card slots
Supports multiple cards on one computer
Multiple SATA3.1 expansion cards can be installed on the same computer
and work at the same time to realize multiple simultaneous reads.

LED working indicator
SATA hard disk and device normal connection indicator light is always on
The indicator light blinks when data exchange, i.e. read/write status is in progress.