Search

Thermalright TLM12QRW,Wireless Splicing Chassis Fan,Building Block Splicing Fan,Infinity Mirror ARGB Lighting Effect,Reverse Blade Design,New Power chip Module simplifies Wiring Management

KWD 4.500

Brand
Thermalright
Category
Fans & Cooling
Weight
200 g
1 +

Special Features

  • [Silent Fan Parameters] cpu Fan size: 124x120x25mm, speed: 1500RPM±10%, noise≤23.2DB(A), air volume: 47.6CFM, wind pressure: 1.31mm H2O, power supply interface: 4PIN PWM, light interface: 5V 3PIN, voltage: DC 12V, current: 0.15A, higher air flow can improve cooling performance, and keep the fan low noise
  • [Anti-Ventilation Design] The case fan blades of the M12QR series rotate counterclockwise, and the fan blade surface is the air outlet direction, which can provide 1500RPM rotation speed, and can be used as an air intake fan for the chassis
  • [PWM Intelligent Temperature Control] The cooler fan has a PWM temperature control function, after connecting the fan to the interface of the motherboard, there is no need to manually adjust the speed, the fan can automatically set the speed according to the temperature
  • [High Performance for Heat Dissipation] The 7-blade design of the noise reduction type can reach 1500RPM, the noise ≤ is 23.2 db(A), and the four corners of the fan are matched with soft silicone corner pads, so that the fan can achieve the performance of high heat dissipation and low noise
  • [Detail Optimization] The argb fan is made of UL CLASSA insulation grade industrial-grade strength PBT+PC material, which supports PWM series control of the fan, and the power supply interface is 4pin PWM, and the lighting interface is 3pin ARGB,Fans of the same type are connected in series through buckles, and then connected to the corresponding interface of the motherboard through connectors that fasten the wires
  • [Wireless Splicing] The new power chip module cable simplifies the cable management, reduces the cumbersome internal wires of the chassis, and provides powerful power for the fan, and the signal and power are transmitted between the fans through the contacts (Note: The cable of the control cable needs to be connected to the side of the fan with pins, do not connect to the other side)

Related Items


{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}