All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
[High Performance] Low Power, Low Noise. Frequency: 100kHz-4GHz, Gain: 18dB, OP1dB: 17dBm Typ. Can be used to replace SPF5189Z, SPF5043Z modules
[USB Interface Powered] ZK04-UM is USB interface powered RF low noise amplifier with convenient power supply interface, low Power and low noise. Supply Current: 26mA, Off-chip bias, user can adjust the bias resistor to reduce the current
[Reduce Noise Floor] Powered by USB type-C interface, and the built-in high PSRR LDO can effectively reduce the power noise, which effectively reduces the noise floor compared with other vendor's USB direct-feed modules
[Application] Recommended for use as tinySA ULTRA 5.8GHz preamplifier. Since the LNA in tinySA ULTRA is effective only below 3.5GHz, adding an LNA can enhance high-frequency sensitivity
[Note] The ZK0X-UM LNA module has a very compact design and uses a system shield case, which may rust if exposed to moisture. Please pay attention to moisture protection when using outdoors
AURSINC ZK05-BM LNA Low Noise Amplifier, Broadband, 100k-6GHz, 20db Gain, USB Interface Powered, Built in Battery, for RF & Software Defined Radio (SDR), Used for TinySA Ultra 5.8GHz Preamplifier
KWD 13.500
Nodelay S-AIR100-PRO Wireless Rear Speaker kit, 5.8G Low Latency Audio Transmitter and Receiver, 80W+80W high Power, Compatible with A/V Receiver, Stable and Anti-Interference
KWD 61.500
Amplificador Tube Preamplifier for Fever HiFi 6J5 Vacuum Tube Preamp NE5532 Pre Amplifier Tone Control Board
KWD 12
Douk Audio NS-13G MAX 300Wx2 Stereo Amplifier with Phono Input - HiFi Class D Mini Power Amp for Home Theater, Turntables, Studio Monitor | TPA3255 Chip, RCA/MM Inputs, Bass/Treble Control (DC 48V)
KWD 47.500
