[TMR Joystick for Steam Deck LCD] – The joystick PCB assembly is for Steam Deck (🔺LCD models) handheld PC. It's a direct replacement for left and right control stick module. Both MEDA and MHDA types are supported. With the electromagnetic TMR hall stick sensors inside, the unit delivers higher sensitivity and accuracy. (🔺Moderate soldering tools and skill required for the thumbstick cap wire.)
[Hardware Calibration onboard] – The stick module comes with high speed MCU calibration onboard. The center and outer curve can be finely set step by step. The deadzone can be limited within the min 2000. More accurate with no drifting, smoother movement and longer lifespan
[What's in box: TMR-SDLCD] – Left and Right Stick Modules, 1x Cross Screwdriver, 1x Plastic Pry Tool. (🔺Check the model of your deck, make sure it's the first LCD model. It is NOT for the second OLED model. 🔺Please refer to the video on the same product ID of U.S. Amazon for the demonstration installation steps.)
Description
Model: TMR-SDLCD
TMR joystick Modules work with Steam Deck LCD
Direct Replacement for Left/Right Control Sticks
MCU Hardware Calibration Better than Official
All the necessary Teardown Tools included
🔺Reminders:
1. Works with the first LCD edition of Steam Deck. Not for OLED
2. Check the controller ID. See if it starts with MEDA or MHDA. Set the onboard switch to the position accordingly
3. Moderate soldering tools and skill required for the replacing operation
4. Refer to the video on the same product ID of U.S. Amazon
What's in the box:
Left and Right Stick Modules
1x Cross Screwdriver
1x Plastic Pry Tool