The Glacier One 360D30 X2 AIO Liquid CPU Cooler is a high-performance CPU cooling solution. Equipped with D30 fans that interconnect into a single 360 frame, simplifying cable management, while D-RGB lighting and fan control are streamlined through one cable. The large copper base and fin array efficiently cool high-end CPUs, even under heavy loads. Product Name: Glacier One 360D30 X2. Product Type: AIO Liquid CPU Cooler. Socket Compatibility: Intel Socket LGA 115x, 1200, 1700, 1851, AMD Socket AM4, AM5. Pump Block (LxWxH): 85.5 x 80.9 x 65.9 mm. Radiator (LxWxH): 397 x 120 x 27mm. Fin Damage QC: Max 10 fin total/Max 4 consecutive fins allowed. Tubing Length: 400mm plus minus 10mm. Tubing outside diameter: 12.5 mm OD. Pump DC 3-pin Cable: 400mm plus minus 10mm. D-RGB PWM Pump Fan 6-pin Cable: 470mm + 105mm plus minus 10MM, Daisy-Chain Linq6 Connector. Cold Plate: Copper 1100. Radiator: Aluminum (AL3003). Tubing: CIIR rubber with black braided sleeves. Housing: ABS plastic. Cooling Liquid: Deionized Water and Propylene Glycol mix. D-RGB PWM Pump Fan Type: 6-Pin Linq6 Daisy-chain Connector. Fan Speed: 1000 - 3000 plus minus 10% RPM. PWM Fan Power: 12V, 0.06 A. D-RGB LED Quantity: 8 pcs. D-RGB LED Power: 5V, 0.35A, 1.75W. Air Flow: 9.8 CFM. Fan Static Pressure: 1.2 mm- H2O. Pump: Pump Speed: 3100 plus minus 10% RPM with 100% duty cycle. Power: 12V, 0.28A (0.45A max), 3.36W (3.96W max). Bearing: Ceramic bearing. Noise: 20 dBA. MTTF: 100,000 hours, 40 degree Celsius in typical use. Fittings: Rotary type. Thermal Paste: 5.2 W/m-k Pre-applied + Phanteks PH-NDC. D30-120 Fan: Fan type: PH-F120D30_DRGB_PWM_BK01. Dimension: 120 x 120 x 30mm. Speed: 250 - 2000 plus minus 10% RPM. Air Flow: 64.3 CFM. Fan Static Pressure: 3.01 mm- H2O. Noise: 30.2 dBA. Connector: 4-pin PWM. Fan Cable length: 700mm. D-RGB Connector: 3-Pin D-RGB Daisy-Chain. D-RGB Cable Length: 600+100 mm. LED Number: 30 pcs. LED Rated Voltage: DC 5V (+5V/D/GND). LED Rated Current: Max:0.45A. For more information about the product, please visit the Phanteks website. With a design that maximizes clearance for motherboard and RAM components, it also features an aluminum cap cover with an integrated fan for extra cooling to surrounding VRMs and M.2 SSD. This makes it perfect for users seeking optimal cooling and a clean, sleek setup.