Search

Search

USB PCIe Card PCI Express to 6 Ports USB Expansion Card (2X Type A - 2X USB C) with External 20pin Type-E Header (to Type-c Front Panel)/ 19pin Adapter Low Profile Bracket with Windows and Linux

KWD 11.500
Brand
YEELIYA
Category
Internal Cards
Weight
109 g
– 1 +

Special Features

  • 1.The USB PCIE card can be easily upgraded to 2x USB C and 2x USB A ports by inserting it into the PCIE x1 slot of your computer.The card also comes with an external 19-pin connector and a USB 20-pin Type E port inside that can be flexibly extended to the front panel of the computer as needed without the need for an additional power supply, thus solving the problem of fewer USB ports on the host computer.To help address your unique requirements and enable hassle-free setup on any computer, we additionally equip a standard PC chassis 12 cm bracket (installed) and a small tower chassis 8 cm short bracket
  • 2.The card offers theoretical data transfer speeds of up to 5Gbps bandwidth,which is 10x faster than USB 2.0.Ideal for file backup,video editing and data recovery. Note: Actual transfer speeds may be limited by the connected device - USB-C ports aren't compatible with the Thunderbolt protocol
  • 3.Compatible with PCIe 3.0 and PCIe 2.0 motherboards for PCI Express x1, x4, x8, x16 slots. Operating system support for Windows XP/Vista/2008 Server/7/8/10 and Linux Mint, Ubuntu 20.04. (Mac isn't supported.) Note: Driver installation is required for Windows XP,Vista/7, Server,not required for Windows 10 .If there are compatibility issues/not working, let me konw
  • 4.The internal circuitry has four power supply modules,which eliminate the need for an additional power adapter for installation.the PCIe USB card draws power directly from the PCI-E slots inside the motherboard. Each connector is individually fused with intelligent overcurrent and short-circuit protection to protect your computer equipment
  • 5.When installing,note that since the pcie card USB port is vertical, first insert the USB flash drive/USB cable into the card's USB slot to seat it.Then tighten the screws,close the PC case cover, turn on the PC and install the driver. For the narrow slot area at the rear of the PC mainframe, simply cut one of the slot's crossbars with small sheet metal hand pliers

Description

The USB PCIE card provides the perfect expansion solution for PC hosts with no or few USB ports in the rear slots/front panel.

Product specification:

Interface Type: PCIe x1

Data Transfer Rate: Up to 5Gbps

Extend Ports: 2x USB C , 2x USB Type-A, 1x USB Type E,1x19-Pin Connector

Host Interface: Support PCI Express (PCIe 3.0/2.0 ，Not support PCIe 1.0 Version )

Operating system：

1. Compatible with Windows XP/Vista/2008/7/Windows 8/10/11 and Linux.(Mac isn't supported.)

2. Windows XP/Vista/ 2008/7 requires driver installation from the included CD drive.

Note:

1. Don't install this pcie usb card while the computer is powered on.

2. If the card doesn't work, first check the PCI-E slot on the motherboard for problems.

3. The USB device/PCI-E slot version may have performance limitations on the throughput/performance of the card's data transfer speed.

4. This USB PCIE card only supports data transmission,doesn't support PD fast charging and video signal transmission (HDMI, VGA Thunderbolt displays conversion), be sure to pay attention before choosing.

6. USB Type-E front panel port can only be connected to USB C port. In addition,the USB C/Type-E port doesn't support Thunderbolt protocol.

7. We weighed convenience, so we designed the USB port on the PCIE card to be vertically oriented.For the issue of being unable to insert the USB device,first insert the USB flash drive/USB cable into the USB slot for positioning.（For the narrow rear slot area of the PC host, you need to just cut the crossbar between the 2 slots with small sheet metal hand pliers.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}