AC adapter not included！
12V 2A Power Adapter (Https://www.amazon.com/dp/B08F9XNRSF?ref=myi_title_dp)
Step-down Voltage DC Cable
DC Input : 12V-24V, current 2A or more.
DC output: 8.4V / 8.8V
DC step-down cable length: 60cm
Compatible with:
Our power supply kit is fully compatible with the following Lumix camera models:
DMC-FZ1000, DMCFZ1000
DMC-FZ200, DMCFZ200, FZ200
DMC-FZ300, DMCFZ300
DMC-G7, DMCG7
DMC-G6, DMCG6, G6
DMC-G5, DMCG5, G5
DMC-GH2, DMCGH2, GH2
DMC-GH2K DMCGH2K, GH2K
DMC-GH2S, DMCGH2S, GH2S
DMC-GX8, DMCGX8, GX8
DMC-G81, G81
DMC-G80, G80
DMC-G85, G85
and more models.
Package include:
1 x Step-down DC Adapter Calbe
1 x DC Coupler DMW-DCC8 DummyBattery
1 x Free cable (male to male)
(DC drive cable, Customized production, Strict inspection,High quality chip,Efficient conversion rate.)
Compare the dc step-down cable with the USB step-up cable:
(1) The dc step-down cable can easily find an external power supply that meets the requirements and can provide a more adequate instantaneous power requirement for the camera shutter.
(2) The USB step-up cable has high requirements for the mobile power of the USB power interface, which involves the supply voltage, the quality of the internal battery cells, and the discharge switch current of the board chip.
Tips:
General digital battery printed above parameters 7.2V / 7.4V labeled battery, it is the camera's minimum operating voltage, these batteries need to use 8.4V charger, full of power, charger 8.4V said no-load voltage, operating voltage and no-load voltage are two different concepts. External power used in the camera, You need to have enough power to supply, the camera is a load,the operating voltage is far lower than the no-load voltage.Therefore, the Camera adapter's no-load voltage is usually between 8V-9V (Note: the multimeter test is no-load voltage).