Connect Servo Controller to Servo Lens,Control Both Focus and Zoom。
For FPD-400D and ZSD-300D Controllers,For Canon 18-80mm and 70-200mm Lenses
Simultaneously control both zoom and focus for Canon CN-E servo lenses using two servo controllers with this Stratus Lens Control Y-Cable from ikan. The Y-cable features two female controller 20-pin connectors on one end and a single, right-angle male lens servo 20-pin connector on the other end.
Cable length :10"inch about 25cm
Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping.Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.
Description
Simultaneously control both zoom and focus for Canon CN-E servo lenses using two servo controllers with this Stratus Lens Control Y-Cable from ikan. The Y-cable features two female controller 20-pin connectors on one end and a single, right-angle male lens servo 20-pin connector on the other end. The cable measures end to end and adds approximately 9" to your existing servo setup.
The cable is compatible with CN-E servo zoom lenses such as the 18-80mm and 70-200mm, and it is also compatible for Canon FPD-400D and ZSD-300D servo controllers.