“Usage Scenarios：

🏠 Home Safety: Baby-proof coffee tables, bookshelves, and fireplace hearths.

🐾 Pet Protection: Shield sharp edges from playful dogs/cats.

👵 Elderly Care: Prevent accidental bumps on walkers or wheelchair-accessible furniture.

🚪 Commercial Use: Protect corners in offices, daycare centers, or rental properties.

"Installation steps:
1: Wipe the installation position with alcohol or detergent to remove dust and oil stains and ensure dry. Tip: Oily residue will cause adhesive failure!
2: Align the anti-collision Angle with the corner of the furniture, press for 5 seconds and release it to test whether it fits. Tip: It is recommended to test stickiness in a hidden location first.
3: Tear off the protective film on the back of the anti-collision Angle to avoid direct contact with the rubber surface.
4: Keep the anti-collision Angle close to the corner and press hard from the center to both sides for 30 seconds to ensure that there are no bubbles. Tip: Do not pull hard within 24 hours after installation.
Safety tips: Ensure that the furniture is secure before installation to avoid falling off due to climbing by children. Check the viscosity regularly (once a month is recommended), and replace it in time after aging.

Surface compatibility:

✅ Suitable for: smooth wood, glass, tile, matte metal.

⚠️ Caution: rough cement wall, wet surface, flannel material.

Removal technique: Use a hair dryer to heat the rubber surface to about 60℃, slowly tear off. Residual glue can be removed with alcohol or lemon oil.
"