Model: GDZ-23
Power: 2.2 kW
Voltage: 220 / 380v
Current: 8A/4.4A
Frequency: 400Hz
Speed: 0-24000rpm
Runout: less than 0.01mm
Diameter (mm): 80
Bearing type: 2*7005C/P4,1*7002C/P4
3-4 fully sealed ball bearings
Chuck: ER20
Water-cooled ER20 chuck block
Grease lubrication
Main use: used for wood, stone, PCB, PVC, PM-MA, plastic, two-tone board (ABS) and other non-metallic carving.
The working environment temperature of the spindle is usually -10~40.
Before installing the first electric spindle to rotate the spindle head by hand, you should feel flexibility and no blockage.
Product power: 2.2kw Model: DB620-2T2.20G
Input voltage: 3PH200V Input frequency: 50/60Hz
Output voltage: 3PH0-220V Product current: 10A

Two speed control modes: no PG vector control (SVC), V/F control
Vector control without PG (SVC): starting torque 0.5 Hz, maximum 150%
8-segment simple PLC function, multi-segment speed control and pid control
Support multiple frequency sets: digital sets, analog sets, PID sets, RS485 communication sets
I/O terminals can be freely programmed to combine multiple working modes according to user needs.
With frequency hopping control function, it can effectively suppress mechanical resonance and make the system more stable and reliable.
It has the function of instantaneous power-off retention, which can avoid the impact on production due to instantaneous power-off
With over-torque and under-torque detection
Automatic voltage setting function, effectively solve the problem of low frequency vibration of high-power motors
Provide multiple fault protection functions: overcurrent, overvoltage, undervoltage, overheat, overload, lack of real-time monitoring and protection to ensure safe operation